油壓電腦控制自動上膠前幫機 HD-801C
9-Pincer Hydraulic Computerized Toe Lasting m/c(With hot mlet )

特點 ：

•  由硬度適中的鐵弗龍製作的束緊器及側壓左右油缸配合，結幫後，鞋面均勻貼緊鞋楦，幫腳的角度與鞋楦一致，不發角，增進美觀度，也減輕了後續作業的難度。
•  兩段式均可調節壓力的壓頭設計，適應不同材質鞋幫的製作，側擺式壓頭增加了操作者的視野，常面對機器無壓抑感。
•  獨特夾爪固定設計，大大地增加爪子使用壽命和爪子更換速度，緊密配合鞋型的每只爪子，均可獨立自動下拉，並可視鞋面鬆緊度，選擇左右獨立自動下拉之行程動作，也可避免因不適當機器調整，掃刀前進時與爪子的撞碰，爪型可根據鞋楦的大小碼自由調整。
•  掃刀具有寸動及調整功能，使不同材質的鞋面結幫控制的調整作業更為方便。掃刀兩段式下掃動作精確地配合膠盤自動上膠，減少了鞋面結幫時的報廢率。
•  內撐台有二段上升功能供選用，配合後跟座動作，可防止鞋楦下滑之現象。
•  外撐台（即膠盤）高低也可視情形自由調節，使得印膠的效果更理想化。
•  本機附有十字投影燈裝配，方便鞋頭校正作業。同時使新手更容易操作。
本機採用 PLC 控制，軟體功能強大，彈指之間可對機器動作做出完美的修改，操作者十分方便選擇各機械動作先後的微調和是否需要的動作，製造出更完美的幫腳

Characteristics:
•  Teflon toe band and specially balance toe band cylinder device ensure more evenly and closely attached to lasts after lasting No protrusion will happen so the surface becomes more beautiful and the quality is upgraded.

•  The mechanism of toe part pressing pad adopts adjustable2-stage pressure, which make operators have good vision.

•  Each set of pincers can be individually adjusted to their corresponding position and be functioned and controlled according to the tension of the uppers.

•  The wiper is functioned with inching movement and speed adjustment, which makes the whole adjustment of last control more convenient.

•  The last support plate is functioned with two-stage rising mechanism which can prevent the last, slip off in conjunction with the action of heel supporter.

•  According to necessary, the height of the nozzle plate can be adjusted for the best cementation.

•  The machine is equipped with cross projector assembly, which is convenient for correcting toe lasting, and helps new comers easily operate the machine.

•  Electrics system

A: the plc controlled system and diagrammatic operation system make the order of all mechanical operations and the adjustment of operation time expressed in letters of figures on the screen which make the operation and adjustment more convenient and steady.

B: the function of breakdown showing and self-examination can testify the all mechanical operation and electric switches from the maintenance.

油壓自動上膠前幫機 HD-805C
9-Pincer Hydraulic Computerized Toe Lasting m/c(With hot mlet )

特點 ：

•  由硬度適中的鐵弗龍製作的束緊器及側壓左右油缸配合，結幫後，鞋面均勻貼緊鞋楦，幫腳的角度與鞋楦一致，不發角，增進美觀度，也減輕了後續作業的難度。
•  兩段式均可調節壓力的壓頭設計，適應不同材質鞋幫的製作，側擺式壓頭增加了操作者的視野，常面對機器無壓抑感。
•  獨特夾爪固定設計，大大地增加爪子使用壽命和爪子更換速度，緊密配合鞋型的每只爪子，均可獨立自動下拉，並可視鞋面鬆緊度，選擇左右獨立自動下拉之行程動作，也可避免因不適當機器調整，掃刀前進時與爪子的撞碰，爪型可根據鞋楦的大小碼自由調整。
•  掃刀具有寸動及調整功能，使不同材質的鞋面結幫控制的調整作業更為方便。掃刀兩段式下掃動作精確地配合膠盤自動上膠，減少了鞋面結幫時的報廢率。
•  內撐台有二段上升功能供選用，配合後跟座動作，可防止鞋楦下滑之現象。
•  外撐台（即膠盤）高低也可視情形自由調節，使得印膠的效果更理想化。
•  本機附有十字投影燈裝配，方便鞋頭校正作業。同時使新手更容易操作。
本機採用 PLC 控制，維修方便。

Characteristics:
•  Teflon toe band and specially balance toe band cylinder device ensure more evenly and closely attached to lasts after lasting No protrusion will happen so the surface becomes more beautiful and the quality is upgraded.

•  The mechanism of toe part pressing pad adopts adjustable2-stage pressure, which make operators have good vision.

•  Each set of pincers can be individually adjusted to their corresponding position and be functioned and controlled according to the tension of the uppers.

•  The wiper is functioned with inching movement and speed adjustment, which makes the whole adjustment of last control more convenient.

•  The last support plate is functioned with two-stage rising mechanism which can prevent the last, slip off in conjunction with the action of heel supporter.

•  According to necessary, the height of the nozzle plate can be adjusted for the best cementation.

•  The machine is equipped with cross projector assembly, which is convenient for correcting toe lasting, and helps new comers easily operate the machine.

•  The plc controlled system with this machine maintenance and operation is easy .

全液壓後幫打釘機 HD-750
Hydraulicheel Seat laster by tacks

特點 ：

•  使用簡單，維修方便
•  更換鞋款速度快
•  調整功能多
•  適應的楦型鞋款廣
•  機械部件安全可靠
•  生產效率高
•  安全液壓驅動，動作精確行程可靠
•  噪音小，機器動作十分安靜
•  可以選擇要作模式 22 顆釘，或 26 顆釘
• 後幫釘腳牢固可靠，效果佳
• 可以在不同的釘位使用二種長度的釘子
• 可選配特殊的打釘器（﹒）
• 可方便地調整打釘的位置
• 後包夾緊力可調
• 掃刀的速度及位置可調（﹒）
•  PLC 程式控制，機器安全可靠

Characteristics:
•  Very simple to use
•  Extreme quickness for the work changes
•  Functional capacity of the adjustments
•  Versatility on the arrangement of the most particular exigencies
•  Excellent reliability
•  High productivity
•  Completely hydraulic functioning
•  Noiseless tacking
•  Work possibility with 22 tacks –or with 26 tacks
•  Tacking of the heel seat with inclined drivers for a better clinching of the tacks
•  Tack pot arranged for the use of 2 different lengths of tacks
•  Last post for special lasts （﹒）
•  Last post outward movement
•  Last post with special flexing for delicate uppers
•  Last post with adjustable ring nut （﹒）
•  Adjustable heel band pressure
•  Adjustable wipers' speed and position
•  Wipers with adjustable temperature
•  In/out adjustable tacking position
PLC controlled processor ( ﹒ )Optionals

鞋頭定型機 HD-82
Toe-part Forming m/c

用途：
1. 鞋頭預定型
特点：
•  適用各種材質之港寶定型 。
•  熱模上 ， 下模可同時加溫軟化鞋面 ， 使鞋面更貼合 。
•  冷模夾具使用鐵弗龍束緊組配合楦頭模 ， 定型效果完美 。
•  楦頭及鐵弗龍帶組依客戶楦頭製作 ， 準確度達 100% 。
•  加熱模設有蒸氣設備（選擇） ， 使鞋面加溫後更具彈性與光澤 。
•  採用水冷式冷凍系統 ， 製冷速度快 、 效果好 ， 冷凍溫度 -30 o C

Characteristics:
•  Suitable for different counter materials and make good shape.

•  The upper and lower mold lf hot mold can be heated at the same time to get good quality.

•  The cold mold and plywood will be custom –made per tob last with accuracy.

•  Hot mold with steam equipment for you choice. Vamp will be more elastic.

•  Adopt environmental protection water-cooling type refrigerating system; quick refrigerating system; quick refrigeration ; good effect ; refrigerating temperature-30 o C.